top of page
Codi's logo

Low-Voltage Switchgear

GENERATOR DOCKING STATION

UL 891 Listed  · NEMA 1 / 3R

The CODI Generator Dock Station is a UL 891-listed dead-front switchboard engineered as a rugged transition point between standby generators and your facility's electrical distribution system. Unlike proprietary systems, it supports power breakers from a variety of manufacturers to match your existing infrastructure with no costly retrofits, no vendor lock-in. Configurable amperage, enclosure ratings, and connections mean it installs to your site's exact specifications, with shorter lead times than national OEMs. Designed and assembled in Littleton, Colorado.

400-4000A

120/208V–277/480V

100kAIC

A UL 891-listed dead-front switchboard built as the transition point between your standby generator and electrical distribution system. Configurable amperage, enclosure ratings, and OEM breaker flexibility — no proprietary lock-in, no costly retrofits. Shorter lead times than national OEMs. Built in Littleton, Colorado.

400-4000A

120/208V–277/480V

100kAIC

6-10

WEEK LEAD TIME

KEY FEATURES

Universal Breaker Compatibility

Flexible design accommodates power breakers from multiple major manufacturers (Eaton, Siemens, ABB, LS, etc.) to meet specific site requirements.

Rapid Deployment

Features industry-standard Cam-Lock connectors for quick, fail-safe generator hookups during emergencies.

Code-Compliant Safety

Built to UL891 Dead-Front Switchboard standards, ensuring a safe, serviceable, and code-compliant connection point.

Phase Rotation Protection

Phase rotation monitoring ensures safe synchronization with facility power systems.

Rugged Construction

Available in TYPE 1 (Indoor), TYPE 3R (Outdoor), and TYPE 3R (Stainless) configurations to withstand harsh environmental conditions.

Safety Interlocking

Options for Kirk Key or mechanical interlocks to prevent cross-connection and ensure safe transfer sequences between utility and generator power.

FULL SPECIFCATIONS

    • UL 891: Dead-Front Switchboards 

    • NFPA 70 (NEC) Article 408: Compliant for Switchboard construction and wire bending space.

    • NEC 700.3(F) & 701.12(G): Meets requirements for temporary generator connection means in Emergency and Legally Required Standby systems.

    • NEC 406.13: Design supports safe use of Single-Pole Separable Interconnects (Cam-Locks).

    • Service Entrance (SE): Suitable for use as Service Equipment when specified (per NEC 230).

    • Configurations to comply with NFPA 110 section 8.4:  Can build to the required load bank testing critical systems i.e. hospitals, data centers.

    • Voltage: Configurable for 208Y/120V, 480Y/277V, and 600V 3-Phase AC systems.

    • Ampacity: Available in continuous current ratings from 400A to 4000A.

    • Short Circuit Current Rating (SCCR): Standard 65kAIC bracing; options available up to 100kAIC to match facility fault current requirements.

    • Environmental: TYPE 3R (Outdoor) rating standard for protection against rain, sleet, and snow; Stainless Steel available for corrosive environments.

    • Service Entrance: Optional Service Entrance (SE) rating allows the unit to serve as the primary disconnect point (per NEC 230).

    • Construction: Dead-front per UL 891

    • Enclosure: Galvannealed steel with powder-coat or stainless steel finish

    • Rating: NEMA 1 (indoor) and NEMA 3R (outdoor)

    • Seismic: Available with bracing to meet project-specific requirements per IBC 1613 and ASCE 7

    • Mounting: Free-standing or wall-mount configurations available depending on ampacity and breaker frame size

    • Access: Padlockable front doors with three-point latching

    • Cable Entry: Removable gland plates and bottom-feed provisions for conduit routing and cable termination

    • Bus: High-conductivity silver-plated copper or tin-plated aluminum; fully rated neutral and ground bus options available

    • Connection Type: Industry-standard Series 16 Cam-Lock receptacles (color-coded to voltage) for rapid, tool-free generator cabling deployment.

    • Circuit Breakers: Universal design accommodates power breakers from major manufacturers (Eaton, Siemens, ABB, etc.) to match existing site standards.

    • Surge Protection: Integrated Type 1 or Type 2 Surge Protective Devices (SPD) available to shield sensitive downstream electronics from transient voltage spikes.

    • Instrumentation: Optional Phase Rotation Monitor and Voltage Indicator(s) ensure safe synchronization with facility power systems before connection.

    • Interlocking: Kirk Key or mechanical walking-beam interlocks available to prevent cross-connection and ensure safe transfer sequences between utility and generator power.

    • Connector Safety: Design supports compliance with NEC 406.13 for Single-Pole Separable Interconnects (Cam-Locks), preventing accidental disconnection under load.

    • Dead-Front Design: Internal barriers prevent accidental contact with live busbars during operation or maintenance.

    • Grounding: Dedicated grounding studs and fully rated ground bus ensure personnel safety during temporary power setup.


    • Wide Voltage Compatibility: Configurable for standard industrial voltages including 208Y/120V, 480Y/277V, and 600V 3-Phase AC systems.

    • High-Capacity Ampacity: Available in a broad range of continuous current ratings from 400A to 4000A to support everything from small commercial facilities to large industrial plants.

    • Quick-Connect Cam-Locks: Industry-standard Series 16 Cam-Lock receptacles (color-coded) ensure rapid, tool-free generator cabling deployment during emergencies.

    • Service Entrance Rated (SE): Optional Service Entrance rating allows the unit to serve as the primary disconnect point, streamlining site architecture.NFPA 70B Compliance-ready Designs for Routine Thermal Inspection

    • Integrated Surge Protection: Available with Type 1 or Type 2 Surge Protective Devices (SPD) to shield sensitive downstream electronics from transient voltage spikes.

    • Flexible Cable Entry: Features removable gland plates and bottom-feed provisions for easy conduit routing and stress-free cable termination.

    • MADE IN THE USA: Engineered and built domestically for superior quality, supply chain reliability, and rapid deployment.

    • Universal Breaker Compatibility: Flexible design accommodates power breakers from multiple major manufacturers (Eaton, Siemens, ABB, LS, etc.) to meet specific site requirements.

    • Rapid Deployment: Features industry-standard Cam-Lock connectors for quick, fail-safe generator hookups during emergencies.

    • Code-Compliant Safety: Built to UL891 Dead-Front Switchboard standards, ensuring a safe, serviceable, and code-compliant connection point.

    • Rugged Construction: Available in TYPE 1 (Indoor), TYPE 3R (Outdoor), and TYPE 3R (Stainless) configurations to withstand harsh environmental conditions.

    • Minimized Downtime: Streamlined architecture reduces connection time, ensuring critical loads are back online faster.

    • Phase Rotation Protection: Phase rotation monitoring ensures safe synchronization with facility power systems.

RESOURCES

this section will be built out once we have more documentation.
this section will be built out once we have more documentation.
this section will be built out once we have more documentation.

VIDEO

BUILT THE CODI WAY

STRUCTURAL ENGINEERING

  • Hex-Formed Corners

​​

  • Powder coating in any color

​

  • Internal cable routing pathways

​

  • Tab & slot nest together precisely

MANUFACTURING EXCELLENCE

  • Shorter lead-times than national OEMs

​

  • Ships right the first time

​

  • 30 years of fabrication experience

​

  • 100k sq.ft. Littleton, CO facility

OEM BREAKER FLEXIBILITY

  • Matches your existing infrastructure specs

​

  • No proprietary lock-in

​

  • Access to multiple OEM breaker brands

STREAMLINED ORDER PROCESS

  • Online configuration tool

​

  • Quotes reviewed in-house - typically within 1 business day 

​

​​

READY TO SPEC YOUR GENERATOR DOCKING STATION?

EXPLORE OTHER PRODUCTS

bottom of page